SB

These rainproof TYPE-3R cabinets have a full plywood backboard 3/4" thick. There are no partitions or splice chambers in these cabinets.

TC

These rainproof TYPE-3R cabinets have an internal splice chamber along the left wall. The remaining area has 3/4" plywood backboard.

GT

These rainproof TYPE-3R cabinets have double doors with a vertical partition where the doors meet. Both compartments have 3/4" plywood backboard.

PB

These rainproof TYPE-3R cabinets are made to fit between building studs on 16" centers and come with mounting rails which allow the user to semi-flush mount the cabinets 3" or 4" into a wall. These cabinets may also be surface mounted. They come with a 3/4" plywood backboard.

PBI

These rainproof TYPE-3R cabinets are manufactured to house 25 pair network interface modules and multiples thereof. They have a full plywood backboard 3/4" thick. These cabinets may be mounted semi-flush 3.00" or 4.00" into a wall or on the surface. Mounting rails are included.

LT

These indoor TYPE-1 cabinets are built to house communication devices of all types, including but not limited to: terminal blocks, network interface devices, jacks, protectors, guides, and wiring. Full 3/4" plywood backboard is provided. Grommeted 'lay-in' openings top and bottom.

MPOP

These rainproof TYPE-3R cabinets are built to house protectors and network interface devices for the phone companies `'Minimum Point of Presence." These cabinets are setup to have the protectors behind the left set of doors and the "NI" devices behind the right doors. All MPOP cabinets have 3/4" plywood backboards and splice chambers along the left wall.

CB

These custom cabinets may be TYPE-1, 3R,4,4x or 12. They may conform to the 'enclosure' sections of UL-497, UL-50, UL-508 or UL-1863 but do not fit any other 'series' as described above.

Sun West is represented by over 2000 distributors nationwide, servicing the communications and electrical industries.

Please call us at 1-800-635-3658 to assist in finding a suitable distributor near you.